Nilesh Sales Agencies

LOCTITE®EA E-30CL is a clear, colorless to slightly yellowish, 2-part, low viscosity, industrial grade epoxy adhesive. It cures at room temperature with minor shrinkage to form an ultra clear adhesive bondline with excellent impact resistance. It resists a wide range of chemicals and solvents and bonds most materials including glass, optical fibers, ceramics, metals and many rigid plastics.

• Excellent impact resistance
• Cures at room temperature with minimal shrinkage to form an ultra clear adhesive bondline
• Has excellent dimensional stability over a wide temperature range
• Used in bonding, small potting, staking and laminating applications where optical clarity and excellent structural, mechanical and electrical insulating properties are required

LOCTITE® AA 352 is a transparent, amber, acrylic adhesive cured by activator and UV light. It is designed for applications that require the prevention of uncured anaerobic adhesive migrating from the joint. Good resistance to chemicals and high humidity. Ideal for the tough bonding of glass, metals and ceramics. Fixture time is 10 seconds and service temperature is -40ºC to +150ºC.

• Prevents uncured anaerobic adhesive migration
• Cures on demand
• Resistant to humidity and chemicals
• Toughened bond
• Ideal for glass, metals and ceramics

LOCTITE EA E-30HV is a high-viscosity, industrial grade epoxy adhesive. Once mixed, the two-part epoxy system develops fast fixture strength and cures within 24 hrs with minimal shrinkage. When fully cured, the epoxy withstands exposure to a wide range of chemicals and solvents, and has excellent dimensional stability over a wide temperature range. LOCTITE EA E-30HV has good balance of flow characteristics and thixotrpic behavior at low shear that ensures applications in vertical and horizontal surfaces with 1-2 mm gap filling and partially non sagging properties.

Loctite E102 is a two-part adhesive consisting of an epoxy resin and a hardener. When mixed in equal volumes, the resin and hardener react to produce a tough, rigid, high strength bond which starts to set in 90-120 minutes and reaches handling strength in 5.5 hours. It can be used as an adhesive for a wide range of material metal, glass, ceramic, wood, many rigid plastics etc. Cured adhesive is electrically insulator in nature. Following are key advantages: Long open time  Develops fixture strength quickly Easy to apply throughout work-life Can be used for potting applications

LOCTITE® EA E-90FL is a gray, opaque, 2-part, toughened, medium viscosity, industrial grade solid epoxy adhesive. After curing at room temperature, it forms a flexible, gray bondline with excellent resistance to shock and impact, a wide range of chemicals and solvents and acts as an excellent electrical insulator. Suited for low-stress, high-impact bonding applications of dissimilar materials.

• Extended working life allows more time to adjust parts during assembly
• Can also be used for repairing strain gauges, sealing seams on fiberglass components, repairing printed circuit boards, bonding stainless steel inserts, and rubber hose to steel tubing
• Typical applications include bonding plastic, metal, glass, wood, ceramic, rubber, and masonry materials where flexibility is required

Heat Cure Epoxy Adhesive with welding strength